Stop by from time to time to get the latest Tips and tricks that just might be the the one thing you needed to have, to give you the edge in that race you just can't seem to win! Face it, we all got to have an edge some how or we will be looking at bumpers all day!

1. 
   Setup Procedure
   Downloadable Word.doc Version
2. 
   
   • 1. Install wheels with proper offsets.
   • 2. Set the tire pressures.
   • 3. Check tire stagger.
   • 4. Check fluid levels ( Be Consistent with Fuel Level)
   • 5. Add Drivers weight to the seat.
   • 6. Set the ride height at each corner.
   • 7. Set camber.
   • 8. Set caster.
   • 9. Set the toe-out.
   • 10. Set pinion angle.
   • 11. Set Third Link Angles.
   • 12. Scale the Car.
   •13. Add weight if needed.
   •14. Reset ride height at each corner.
   •15. Reset front end alignment.
   •16. Log all of your numbers on the chassis & Weight Data sheet.

Provided by: Norman Racing Products
46 Alteza Dr.
HSV, AR 71909
501-922-5711

Before loading the car onto the trailer, make one final check of the following items. Doing so religiously, will prevent extra work at the track.

Pre-loading Checklist
Downloadable Word.doc Version

• • Check all fluids
  • Check fastners
  • Set Tire Pressures
  • Torque Wheels
  • Check Fuel Level
  • Check Tire Stagger
  • Check Sway Bar Condition
  • Check Electrical and Fuel Connections
  • Check all Safety Equipment
  • Check all Body Mountings
  • Charge Battery
  • Blow out radiator